WES 126378 Rechargeable Lithium-Ion Battery Obtains CCC Certification | HUIZHOU WES NEW ENERGY COMPANY LIMITED

WES 126378 Rechargeable Lithium-Ion Battery Obtains CCC Certification

Certification completed under the new GB 47372-2026 power-bank standard ahead of its mandatory enforcement; certificate valid through November 2031

Source: HUIZHOU WES NEW ENERGY COMPANY LIMITED  | 
Summary HUIZHOU WES NEW ENERGY COMPANY LIMITED has obtained China Compulsory Certification (CCC) for its 126378 rechargeable lithium-ion battery, completing certification under the new GB 47372-2026 power-bank standard during the transition period, with the certificate valid through November 2031.

HUIZHOU, Nov. 17, 2026 — The 126378 rechargeable lithium-ion battery of HUIZHOU WES NEW ENERGY COMPANY LIMITED (hereinafter “WES”) has been granted China Compulsory Certification (CCC). The certificate (No. 2026010916907192), issued on November 12, 2026 by China Quality Certification Centre (CQC), is valid until November 11, 2031, and lists GB 31241-2022 and GB 47372-2026 as the applicable standards.

1. Certification Basis: Completed Under the New Power-Bank Standard During the Transition Period

GB 47372-2026 (Safety Technical Specification for Power Banks) was published in April 2026 and takes mandatory effect from April 1, 2027. The period between publication and mandatory enforcement is a transition period, during which manufacturers may complete verification and certification under the new standard. WES completed this certification under GB 47372-2026 — that is, before the new standard becomes mandatory.

The certification is carried out under CNCA-C09-02:2026, “Rules for the Implementation of Compulsory Product Certification: Mobile Power Banks, Lithium-Ion Cells and Battery Packs (Trial).” This rule covers both power banks and lithium-ion cells / battery packs.

WES 126378 rechargeable lithium-ion battery CCC certification certificate, No. 2026010916907192, applicable standards GB 31241-2022 and GB 47372-2026
CCC certification certificate for the 126378 rechargeable lithium-ion battery

2. The Core of CCC Assessment: Production System and Product Consistency

CCC is centered on production-system (factory) assessment rather than a one-off laboratory test. The certification body conducts on-site assessment of quality-assurance capability and product consistency; the certification scope covers all 126378 production lines at WES's Huizhou base, with samples drawn on site and sent for laboratory testing. After certification, WES is subject to annual surveillance, and process data are traceable, maintaining consistency between the product and its certified state.

The main processes of the 126378 production line include adhesive application, welding, top and side sealing, formation, and capacity grading.

In addition, WES will continue to prioritize its multi-tab production line, extending it toward power banks, power tools, garden tools, and emergency jump starters.

Multi-tab production line at WES's Huizhou base
Multi-tab production line (I)
Multi-tab production line at WES's Huizhou base
Multi-tab production line (II)
Multi-tab production line at WES's Huizhou base
Multi-tab production line (III)

On cleanroom grade: WES's cleanroom grade is a self-imposed internal control standard, not a mandatory requirement of CCC or the national standards above. All cleanroom figures cited in this article use this basis.

Exterior view of the WES factory in Huizhou
Exterior of the WES factory
Capacity grading process for the 126378 rechargeable lithium-ion battery at WES
Capacity grading of the 126378 battery

3. Safety Requirements and Failure Mechanisms Under the New Standard

On finished-product safety, GB 47372-2026 is stricter than GB 31241-2022: the crush test is increased from 13 kN to 20 kN; the thermal (heat) test is adjusted to 135°C held for 60 minutes; and a nail penetration test is added. These items target the main failure paths of internal short-circuit in the cell.

The industry generally attributes the main causes of internal short-circuit in lithium-ion batteries to three: separator damage, lithium plating on the positive electrode, and dendrite growth. The new standard sets stricter verification requirements for these failure modes.

A note on scope: the certified product name is “rechargeable lithium-ion battery”, and the certification covers the cell / battery category. Because the 126378 cell is used in power banks, this certification also applies GB 47372-2026. Cell certification and finished power-bank (assembly) certification are different levels and should not be conflated.

Close-up of a 126378 rechargeable lithium-ion battery cell
126378 rechargeable lithium-ion battery cell

4. Conclusion

WES's completion of CCC for the 126378 rechargeable lithium-ion battery under the new standard reflects that its verification of the quality system, process consistency, and finished-product safety has been completed in advance, with a verifiable margin of readiness.

Clients and partners are welcome to visit the Huinan Hi-tech Industrial Park for on-site inspection.

Certification Information

Product name
Rechargeable lithium-ion battery 126378
Nominal voltage / rated capacity / rated energy
3.85 V / 10,000 mAh / 38.5 Wh
Charge-limit voltage
4.4 V
Applicable standards
GB 31241-2022; GB 47372-2026
Implementation rule
CNCA-C09-02:2026 (Rules for the Implementation of Compulsory Product Certification: Mobile Power Banks, Lithium-Ion Cells and Battery Packs, Trial)
Certificate No.
2026010916907192
Issuing body
China Quality Certification Centre (CQC)
Issued / valid until
2026-11-12 / 2031-11-11
Applicant / manufacturer
HUIZHOU WES NEW ENERGY COMPANY LIMITED
Address
Building A1, Shuibei Industrial Park, JINDA Road No.7, Huinan Hi-tech Industrial Park, Huaio Avenue, Huizhou, Guangdong
Verification
Certificate QR code / CNCA (www.cnca.gov.cn) / CQC (http://www.qcc.com.cn)

Frequently Asked Questions

Does the 126378 CCC certification apply to power banks?

The certificate lists the product name as “rechargeable lithium-ion battery”, and the certification scope covers the cell / battery category. Because the 126378 cell is used in power banks, this certification also applies GB 47372-2026. Cell certification and finished power-bank (assembly) certification are different levels and should be understood separately.

When does GB 47372-2026 become mandatory?

The standard was published in April 2026 and takes mandatory effect from April 1, 2027. The period between publication and enforcement is the transition period. WES completed certification under the new standard within this transition period.

What new safety requirements does the standard impose on cells and batteries?

Compared with GB 31241-2022, GB 47372-2026 raises the crush test from 13 kN to 20 kN, adjusts the thermal test to 135°C held for 60 minutes, and adds a nail penetration test, addressing the three internal short-circuit failure modes: separator damage, lithium plating on the positive electrode, and dendrite growth.

What does the CCC assessment cover?

It is centered on production-system assessment, including on-site evaluation of quality-assurance capability and product consistency, covering all 126378 lines at the Huizhou base with on-site sampling for laboratory testing. After certification, annual surveillance applies and process data are traceable.

How can the certificate be verified?

Certificate No. 2026010916907192 — scan the certificate QR code, or verify via the CNCA website (www.cnca.gov.cn) or China Quality Certification Centre (http://www.qcc.com.cn).