Cutaway view of a six-rotor UAV with an OEM battery pack installed, exposing internal cell modules, wiring harness, ESCs and motor assemblies. — Pack-to-airframe integration: cell layout, harness routing and thermal path designed together — not adapted after the fact.

Custom OEM Drone Battery Packs, Engineered to Your Airframe

Off-the-shelf batteries force your airframe to adapt to the pack. Custom OEM reverses that: the pack is engineered to your airframe — your voltage, your capacity, your form factor, your BMS, your connector, your certification requirements.

As a direct cell-to-pack manufacturer (not a reseller), WES controls the entire chain from cell production to final assembly. That single fact changes everything about cost, consistency, and speed for B2B buyers.

Why Build Custom Instead of Buying Off the Shelf

Off-the-shelf drone battery packs vs. custom OEM packs from WES
Off-the-shelf pack	Custom OEM with WES
Form factor	Fixed — you design around it	Engineered to your airframe's cavity and CG
Voltage & capacity	Generic	Exact voltage (3S–24S+) and capacity matched to motors
BMS	Stock BMS with limited comms	BMS protocol integrated with your flight controller
连接器	标准	XT60 / XT90 / EC5 / AS150 / custom — your choice
超高能量密度	Compromise	Semi-solid, LiPo, or Li-ion selected for your mission
Supply chain	No control	Cell-to-pack traceability, on-time fleet delivery

What We Customize

Chemistry. Semi-solid for heavy-lift and agriculture, high-rate LiPo for burst, Li-ion for endurance. We start from the mission and pick the cell that fits — not the other way around. See LiPo vs Li-ion vs Semi-Solid to understand the trade-offs.
Voltage and configuration. Any series/parallel layout, from compact 3S packs to industrial 24S systems. Our production line already covers 6S LiPo packs, 14S agriculture packs, and 24S 70Ah heavy-lift systems.
Form factor. Pouch, cylindrical, or prismatic — shaped and mounted to your frame, with your preferred mechanical interface.
BMS and communication. Smart BMS with SMBus, CAN, UART, or RS485 — fuel gauge, balancing, thermal protection, and telemetry integrated to your stack.
Connectors. XT60, XT90, EC5, AS150, JST-XH balance leads, or fully custom. Custom connectors are available on request.
Certification. UN38.3, IEC 62133, UL 1642, CE, CB, RoHS — validated as required for your target market.

The OEM Process

A mature program runs through five stages, each with clear deliverables:

Requirement definition — mission profile, environment, volume forecast, target cost. We translate "we need 45 minutes at 20kg payload" into engineering specs.
Engineering and design — cell selection, pack layout, thermal strategy, BMS selection, DFM review.
Prototyping — functional samples for bench and flight testing, iterated until the pack meets your spec.
Validation — cycle life, thermal abuse, vibration, and transport testing to your compliance targets.
Mass production — tooling, in-line QC, and scheduled delivery to your build plan.

Technicians in blue uniforms assembling and inspecting custom battery packs along an automated cell-to-pack production line. — Cell-to-pack production under one roof: from electrode and cell assembly through pack integration and end-of-line QC.

Timeline: first samples typically arrive in weeks, depending on cell availability and BMS complexity. Fully custom form factors require additional tooling time.

MOQ and lead time depend on cell selection, tooling, and BMS. Semi-custom packs built from existing cells and tooling carry modest MOQs; fully bespoke form factors require higher volume commitments. Contact us with your target volume, and we will return a specific quotation.

为何选择WES

Direct manufacturer. We make the cells 以及 the packs — no middlemen, no markup, full traceability.
Industrial-grade validation. Every program runs through cycle-life, thermal-abuse, and vibration testing beyond consumer standards.
Proven in the field. Production packs already power agricultural spraying, heavy-lift logistics, underwater robotics, and quadruped platforms.
Quality systems you can audit. IATF 16949-aligned processes and a full battery-certification portfolio.
Scale-ready. From pilot batches to fleet-scale volume, with on-time delivery.

A six-rotor agricultural spraying drone hovering over farmland, powered by a custom industrial drone battery pack. — Field-proven in agricultural spraying — where cycle life, discharge rate and thermal stability are measured in seasons, not spec sheets.

Representative production programs

Representative WES production programs by chemistry, configuration and application
Product	化学	PACK组合	应用
66000mAh semi-solid	Semi-solid	23.7V 6S1P	Heavy-lift logistics, agriculture
24S 70Ah industrial pack	Semi-solid	6048Wh	Heavy-lift UAV
14S 20Ah smart battery	Smart Li-ion	1064Wh	Agricultural spraying
6S high-discharge LiPo	LiPo	6S1P	Racing, high-burst

常见问题解答

How does the custom drone battery OEM process work?

You provide a mission profile and target specifications; we engineer a pack to your form factor, voltage, capacity, BMS, and connector, then build prototypes, validate them, and move to mass production. First samples typically arrive within weeks, depending on cell and BMS availability.

Can I get a battery with a custom voltage, capacity, size and connector?

Yes. Voltage (3S to 24S+), capacity, physical form factor, BMS communication protocol, and connectors are all customizable. Connectors include XT60, XT90, EC5, AS150, and JST-XH, with fully custom options available on request.

What is the typical MOQ and lead time for a custom battery pack?

Both depend on cell selection, tooling, and BMS complexity. Semi-custom packs built from existing cells and tooling have modest MOQs and weeks-long lead times; fully bespoke form factors require higher volume commitments and additional tooling time. Contact us with your target volume for a specific quotation.

Do you provide the certifications needed for export?

Yes. We validate packs to UN38.3, IEC 62133, UL 1642, CE, CB, and RoHS as required by your target market, and we operate IATF 16949-aligned quality processes.

Are you a manufacturer or a reseller?

WES is a direct cell-to-pack manufacturer. We produce the cells and assemble the packs in-house, which gives you full traceability, better cost, and faster engineering turnarounds than a reseller can offer.

Start Your Custom Program

You have defined the mission; now define the battery. Tell us your payload, flight time, operating environment, and target volume, and our engineering team will respond with a feasibility assessment and quotation.

Request a custom battery quote